All of our films come with the adhesives already on them. There is a clear protective liner which must be removed and discarded before installation of the material. Water-activated adhesives are dry to the touch when the protective liner is removed, not tacky or sticky. To activate the adhesive, you must get it wet with a solution of soapy water. This allows you to position and handle the film easily in the installation process. Most of the residential and commercial films we sell use water-activated adhesives. Pressure-sensitive adhesive is sticky to the touch when you remove the clear liner. Like the dry adhesive, however, you must still get it wet with mounting solution prior to installation.
You will need a spray bottle for your mounting solution and a razor blade and scrubbing pad for the preparation of the glass. You will need a squeegee, hard card, and knife for the installation of your tint. You will need a small amount of liquid dish soap, and water to make your cleaning and mounting solution.
If you follow the instructions we provide in our videos, installing window tint is very easy for do-it-yourselfers.
Most all of our residential and commercial films are tested and rated “dual pane safe.” The ones that are not, state “not recommended for dual-pane windows” in the description of the product. None of our automotive films are dual-pane safe, and should not be used on dual-pane windows. Dual-pane windows are the type that have two pieces of glass with a spacer between them at the perimeter of the glass. You can tell by looking at the edge of the glass for the spacer, it is usually made of shiny aluminum. If you are not sure, check with the manufacturer of the windows. Even though we have tested the products to be dual-pane safe, Hi-Tech is not responsible for any loss or damage which may occur from using these products. The terms are clearly stated in our terms and conditions.
No. All of our kits are custom cut to fill your order. We begin processing the order as it is received. Once the order has been cut, the product is only useful for your respective order. This is stated in our terms and conditions.
This stands for visible light transmission. This means that after the film has been applied to your windows, the VLT percentage is the amount of light that the film will allow to transmit through the glass. The lower the VLT, the darker the film.
We carry films that are highly reflective on the outside, yet less so on the inside to reduce glare. They work just like a pair of mirrored sunglasses, which means that for the most part, during the day, anyone looking in the window will see their own reflection instead of seeing through the window. There are no films, however, that can completely block people from seeing through a window when the light inside is greater than the light outside. So at night, people will be able to see in, even if the visible light transmission is very low.
You can use as dark a film as your local or state law allows. If you have poor night vision, we recommend that you choose a medium or light film to see out easier at night.
We do offer some kits for vans. Do to the highly customized nature of most vans, the window patterns are often too complex to include in an online pricing structure, and require a customized estimate. We suggest that you e-mail us with your make and model. We will let you know if we can make a kit for you. We currently do not offer kits for RVs.
If you have many windows that you wish to tint, it will save you even more money if you buy the tint by the roll. If you have only a few windows, we recommend a kit. Tint by the roll comes in widths of 3 feet, 4 feet, 5 feet and, in some cases, 6 feet, and in lengths from 10 feet to 100 feet. You should use the order form for a (residential/commercial) pre-cut kit to calculate the price for the windows you need, then compare that total price with the price of a roll of film that would cover the same square area. By doing so, you will see which way is the more cost effective for your needs.
There are two main factors which separate residential films from automotive films. The first is adhesive. Most of our residential films have a water-activated adhesive, which means it is not sticky to the touch, and you use the mounting solution to activate it during installation. The automotive adhesive is sticky to the touch, making it more aggressive for automotive applications. The second factor is the functionality and construction of the product. All of our films are constructed for optimal performance for what they are intended to be used for. We do not recommend that you mix and match films (i.e., automotive film on residential or vice versa).
We only sell films that meet our professional quality standards. All of our films are the same films used every day in the industry by professionals.
Cold weather and humid conditions can lengthen the dry-out time, while warm, sunny weather will speed it up. Dry-out times can vary from a few days to as long as six months, but the film will eventually dry completely. Moisture that is trapped during the installation process can cause bubbles or a slightly cloudy appearance. This is normal. Do not try to pierce or cut the film in an attempt to drain the trapped moisture. This will damage the film. Just be patient and allow the film to dry completely on its own.
Do not clean the film for 30 days following installation. This allows the film to adhere securely to the window. When you do clean your windows, make sure to use mild cleaning solution and fresh, clean, soft materials. To avoid scratching the film, do not use abrasive cleaning materials, bristle brushes, or cloth that contains dirt particles. Even some paper towels are rough enough to scratch your film, causing a dull finish over time.
Tinting will reduce the amount of light available to your plants, so variegated or light-green plants should be considered when choosing your tint shade. Most tropical plants require less light and heat than clear windows provide, and may even benefit from the added sun protection. Less light, however, will slow their growth. Some plants may go into shock while adjusting to the new lighting conditions. If this continues for longer than a week, we recommend that you move the plant to a location where it will receive more light.
Window film will not completely eliminate fading, but installing it is one of the best things you can do to block the factors that cause it. Window film blocks 99% of UV rays, which are responsible for about 40% of the fading equation. Heat makes up about 25%, visible light about 25%, and miscellaneous factors bring home the final 10%. Short of keeping your home furnishings in darkness, window film is your best defense against fading.
I followed the instructions and installed my window film, but now it looks foggy and cloudy. What is wrong?
The residential and commercial window film has a water activated adhesive system on the side that attaches to the glass. When you use the mounting application solution as required to do the installation, the adhesive is activated by the soapy water solution. Once the installation is completed, it is common for the adhesive to get a foggy or cloudy appearance to it. This is due to the solution activating the adhesive. This process can take from 1 day to 30 days depending on the amount of heat that is hitting the window from the sun. Once the solution has dried out, the foggy and cloudy look will go away. When the fog has completely cleared, you will know that the film has fully cured on the window and can be cleaned.